| |
Megol Hydraulik/Getriebeoel HLP/CLP 46 AF
megol hydraulic/transmission oil HLP/CLP 46 AF can be used as pressure fluid in hydraulic systems
as well as in industrial gearboxes, roller and plain bearings that are exposed to high loads, and in
particular also for large systems with circulation lubrication systems. It contains active ingredients to
increase ageing resistance, anti-corrosive properties and EP properties. As a result of these additives
it satisfies all requirements and is primarily used in hydraulic systems in which high thermal stresses
occur, corrosion can form due to water and whose pumps or hydraulic motors require oil types with
wear protection agents for mixed friction as a result of the operating conditions. Since it is free of
ashing additives, it does not form any adhesive deposits if overheated.
Approvals / Specifications: Hydraulic Oil DIN 51524 ¨C HLP 46 Lubricating Oil DIN 51517 ¨C CLP 46
Characteristic data |
¡¡ |
¡¡ |
Approx. values |
ISO viscosity class |
DIN 51519 |
¡¡ |
VG 46 |
Viscosity at 0¡ãC |
DIN 51562 |
mm2/s |
570 |
Viscosity at 40¡ãC |
DIN 51562 |
mm2/s |
46.5 |
Viscosity at 100¡ãC |
DIN 51562 |
mm2/s |
6.85 |
Viscosity index |
DIN ISO 2909 |
¡¡ |
102 |
Density at 15¡ãC |
DIN 51757 |
kg/m3 |
880 |
Flash point |
DIN ISO 2592 |
¡ãC |
215 |
Pour point |
DIN ISO 3016 |
¡ãC |
-30 |
Air separation capacity / 50¡ãC |
DIN 51381 |
min. |
5 |
De-emulsifying capacity / 54¡ãC |
DIN 51599 |
min. |
10 |
Ash, oxide |
DIN EN 7 |
g/100 g |
0.01 |
Ash, sulphate |
DIN 51575 |
g/100 g |
0.02 |
Coke residue using the |
DIN 51551 |
g/100 g |
0.12 |
Conradson method with ash |
¡¡ |
¡¡ |
¡¡ |
Content of asphaltenes |
DIN 51595 |
g/100 g |
m.n.n. *) |
Content of undissolved substances |
DIN 51592 |
g/100 g |
m.n.n. *) |
Water content |
DIN ISO 3733 |
g/100 g |
m.n.n. *) |
Neutralisation index, acid |
DIN 51558 Part 1 |
mg KOH/g |
0.2 |
Saponification index |
DIN 51559 |
mg KOH/g |
0.35 |
Corrosive effect on steel |
DIN 51585 |
degree of corrosion |
0-B |
Corrosive effect on copper |
DIN 51759 |
degree of corrosion |
1 - 125 A3 |
Ageing properties |
¡¡ |
mg KOH/g |
< 2 |
a load of 30 lbs |
SEB 181 302 |
mg |
4 |
|
|
